| February 26, 2019 |
Turn your PC-3000 tools into the PC-3000 Hybrid System to Recover Data and Evidence from Hybrid RAID |
The ever-growing demand for storage capacities is often met by adding new hard drive arrays and systems to the already functioning RAID arrays. This approach, while cutting the upgrade costs, often results in the formation of arrays made up of different storage media devices: SATA and SAS/SCSI HDDs. Thus, the question arises: how to recover data and evidence from these hybrid systems in case of damage?
To work with such RAID arrays, we have developed a powerful solution which is able to help you in the most efficient way. A new PC-3000 SAS 6 Gbit/s System paired with PC-3000 Express RAID System or PC-3000 SAS 6 Gbit/s RAID System paired with PC-3000 Express System will turn your tools into the PC-3000 Hybrid System.
The PC-3000 Hybrid System Scheme
The PC-3000 Hybrid System offers you new opportunities. By using it, you will be able to:
- Recover data and evidence from hybrid RAID arrays which consist of different hard drive types: SATA and SATA/SCSI.
- Operate with big RAID arrays which contain up to 8 HDDs (4 SATA drives are connected to the PC-3000 Express board and 4 more drives — to the PC-3000 SAS board). Thus, if you have such RAID array, you will be able to connect all the drives to the PC-3000 ports and be sure that the data will not be changed during the data recovery process.
- Connect any number of devices to available ports. High-speed PC-3000 SAS 6 Gbit/s allows to connect SATA and SAS HDDs and work with them at the highest possible speed, both for reading and writing data (for example, when creating a copy).
If you have any questions regarding this system, do not hesitate to send an email to info@acelab.eu.com or to your personal sales representative.
